[tarzen]

I am searching for Atmega File for Dish Tomico Key set. I could not find any. All the files which are in circulation are for No RSA Dish. If some one has the working Atmega Dish File for Tomico Keyset please post. Or is there a way to modify the flash and eprom files with Tomico IRD and Box keys.

[wooha]

Originally Posted by tarzen

I am searching for Atmega File for Dish Tomico Key set. I could not find any. All the files which are in circulation are for No RSA Dish. If some one has the working Atmega Dish File for Tomico Keyset please post. Or is there a way to modify the flash and eprom files with Tomico IRD and Box keys.

I just switched from Tomico to NoRSA and everything works now... you have to switch your Reciever and Waffer.

I couldn't find anything to work with Tomico.

[rsayyed]

How did you switch from tomico to no rsa, can you please tell me what files are needed - i have 2700 and 301-010 receivers ....

[wooha]

Originally Posted by rsayyed

How did you switch from tomico to no rsa, can you please tell me what files are needed - i have 2700 and 301-010 receivers ....

For 2700
You have to use flashedit create a new flash and eeprom with no RSA MOD Box keys and IRD#
Load your new IRD files with Jkeys
and then you can use jeepers to create file for your Atmega128...

Use this file for Jeepers...
http://id-discussions.com/forum/show...ega128+phoenix

[rsayyed]

its been ages when i did last. Is there a how to and also isnt there a no rsa hex and eeprom file out there that i can load in my receiver

[waywoos]

just find premade tsop image for your build config
good to go then.
lots of sites offer them. do a google search.

[rsayyed]

what is the right software version I should load for 2700, 2800 and 301-010 receivers or does it even matter any more or not.

[waywoos]

it doesnt really matter.
it will update on its own if you want.
keep it off at night and it will update.
or junkyardfix it lol.

[wooha]

Originally Posted by rsayyed

what is the right software version I should load for 2700, 2800 and 301-010 receivers or does it even matter any more or not.

For 2700,2800 (don't know about 301-010) there is a sticker on inside of the box that has a 4 letters... I think the first 3 have to match and you can grab a TSOP as someone mentioned... but you have to get a NO RSA MOD TSOP... if you are going to use the no rsa mod Jeepers files that someone kindly posted.

If you don't have your old one... use JKEYS delete SA5 in the Flash and then hook you box up and it will take the update.

Once you have the update...save a copy of the flash and eeprom and use flashedit Beta 2.1.9... you will need to apply a 2700-2800 .fs script and then you can change the IRD# and Box keys to No RSA Mod. Save the new flash and virgin eeprom and put it back into the box.

This is what I did and it worked for me.

There is how to giudes out there you just have to search around for them...

[rsayyed]

I just flashed my 2800 reciver with no ras. It all worked fine but now the receiver has green light on, It goes off and then it comes back on again . Is all fine or do I need to wait ?